Homemade Watering Sprinkler - Waste Utilization
I have some flowers,
Some of them are more delicate,
He has to water, but he can't water too much.
So use a sprinkler,
The amount of water will not be too great.
If there is too much water on the leaves, it will be dry.
So I made a watering sprinkler.
material:
Empty bottle of shampoo.
Used nasal spray nozzle.
practice:
Shampoo nozzle, cut a small part,
Insert the nozzle of the nasal spray,
Gently press one ,
It’s a watering sprinkler.
自制浇花洒水器 - 废弃物利用
我有种一些花草,
其中有一些比较娇贵,
他要浇水,但又不可以浇水太多,
所以要使用到洒水器,
出水量才不会太大,
若树叶上的水分太多是会枯的,
所以我自制了一个浇花洒水器.
材料:
用完的洗发精的空瓶.
用完的喷鼻液的喷头.
做法:
洗发精的喷头,裁切掉一小部分,
将喷鼻液的喷头插进去,
轻轻一压,
就是洒水器了.
as shown below, use the nozzle at the red circle.
(中文語文:如下圖所示,使用紅色圈圈處的噴頭)
the shampoo nozzle, cut a small part, and insert the nozzle of the Nasal spray.
note:
The shampoo nozzle is a large and small hole. The smaller the outer hole, the larger the hole inside.
So from the outermost, slowly cut,
Insert the nozzle of the potion into it,
If it can't get in, again cut a little bit.
When you cut it just right,
After I inserted it, it will got stuck.
(中文語文:將洗髮精的噴嘴,切下一小部分,和插入藥水瓶的噴嘴.
注意:
洗髮精的噴嘴是大小孔的,越外面的孔越小,越裡面的孔越大,
所以要從最外面,慢慢的切,
把藥水的噴嘴插進去看看,
插不進去就在切一點點,
當你切得剛剛好,
插進去後就卡住了.)
